China Precise Planetary Gear Reducer with 400W Servo Motor and 60 Steering Wheel Output Reducer gear cycle

Merchandise Description

PLANETX planetary reduce
Disc output reducer is broadly utilized in industrial merchandise due to its tiny measurement, light weight, massive torque, vast pace ratio variety, higher rigidity, high precision, substantial transmission effectiveness, maintenance free of charge and other qualities.
The planetary reducer framework is composed of a sunshine equipment and a earth equipment to sort an external mesh, and a world equipment and an interior gear ring to form an interior mesh, so that the earth gear can comprehend revolution whilst recognizing self rotation and greatest transmission of guarantee force The minimal velocity ratio of single-phase reduction is 3, and the optimum velocity ratio is generally not more than 10. Frequent reduction ratios are 3, 4, 5, 6, 7, 8, and 10. The amount of reducer levels is normally not far more than 3, and the pace ratio is not more than 1.
Most planetary reducers are employed with servo motors to minimize speed, increase torque, boost inertia, and ensure return precision (the higher the return precision, the higher the price). The highest rated input pace of planetary reducers can achieve 12000 rpm (relying on the dimension of the reducer by itself, the greater the reducer, the scaled-down the rated enter velocity), and the running temperature is usually between – forty ºC and 120 ºC.

Application description of reducer

 

  Product

 
Unit

PLH064A
PZH064A

PLH090A
PZH090A

Ratios(i)

 
 
 
 
Stages
 
 

    Rated output torque

Nm

16.5 63 3 1-levels
           
26 90 four
28 one hundred five
twenty 68 7
twelve.5 43 10
19.5 75 nine
31.five one hundred ten 12
31.five 110 16
31.5 one hundred ten 20
33.five 120 25
31.five a hundred and ten 28 2-stages
33.five one hundred twenty 35
31.5 a hundred and ten forty
33.5 120 fifty
24 81 70
37.5 130 80
37.5 one hundred thirty a hundred
forty 145 one hundred twenty five
37.5 130 140
40 a hundred forty five a hundred seventy five
37.5 one hundred thirty 200
40 a hundred forty five 250
37.five 130 280 3-phases
40 a hundred forty five 350
37.five 130 four hundred
forty 145 five hundred
28 95 seven-hundred
eighteen.8 sixty two 1000
 
Max.output
torque
Nm 2/2*Nominal torqute

Backlash arcmin <4 <4 P1 1-phases
<8 <8 P2
<8 <8 P1 2-phases
<12 <12 P2  
<10 <10 P1 3-levels
<14 <14 P2
NO-load torque NM .18 .6   one-stages 
.seventeen .fifty five   2-stegas
.16 .five   3-stegas

company-HangZhou-PLT-Transmission-Products-Co-Ltd-.html
Q: How to get a fast estimate
A: Remember to supply the following details when getting in touch with us

  1. Motor manufacturer
  2. Motor model
  3. Motor dimension drawing
  4. What is the gear ratio

Q: How long is your shipping and delivery day
A: We all set up it now, but it normally takes 7-fifteen days if it is not non-normal. Non standard fifteen-thirty times, depending on the particular predicament
Q:Do you give samples, free or added
A: A: You can reserve 1 initial, and acquire it on demand
Company group creating

one.How do we know the product good quality?
A1.We advise you get samples. In addition, you can deliver an electronic mail to us for detailed photographs to verify if you are unable to get enough info in the solution website page

2.Is this your ultimate value? Can I have a price cut?A2.Our price is ex manufacturing facility.
A2.If you want a massive quantity, we can give you a low cost
3.Can we check out your factory?
A3.Yes, a warm 

To take part in the exhibitionelcome. Floor 3, Creating 1, No. 12, Xihu (West Lake) Dis. Highway, Wanjiang District, HangZhou Metropolis, ZheJiang Province


/ Piece
|
1 Piece

(Min. Order)

###

Warranty: 1 Year
Classification: Gear Parts
Processing Type: Metal Processing
Match Machine: Weaving Equipment
Material: Metal
Processing Level: Precision Finishing

###

Customization:
Available

|


###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

/ Piece
|
1 Piece

(Min. Order)

###

Warranty: 1 Year
Classification: Gear Parts
Processing Type: Metal Processing
Match Machine: Weaving Equipment
Material: Metal
Processing Level: Precision Finishing

###

Customization:
Available

|


###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

###

/**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**//**/

Helical, Straight-Cut, and Spiral-Bevel Gears

If you are planning to use bevel gears in your machine, you need to understand the differences between Helical, Straight-cut, and Spiral bevel gears. This article will introduce you to these gears, as well as their applications. The article will also discuss the benefits and disadvantages of each type of bevel gear. Once you know the differences, you can choose the right gear for your machine. It is easy to learn about spiral bevel gears.
gear

Spiral bevel gear

Spiral bevel gears play a critical role in the aeronautical transmission system. Their failure can cause devastating accidents. Therefore, accurate detection and fault analysis are necessary for maximizing gear system efficiency. This article will discuss the role of computer aided tooth contact analysis in fault detection and meshing pinion position errors. You can use this method to detect problems in spiral bevel gears. Further, you will learn about its application in other transmission systems.
Spiral bevel gears are designed to mesh the gear teeth more slowly and appropriately. Compared to straight bevel gears, spiral bevel gears are less expensive to manufacture with CNC machining. Spiral bevel gears have a wide range of applications and can even be used to reduce the size of drive shafts and bearings. There are many advantages to spiral bevel gears, but most of them are low-cost.
This type of bevel gear has three basic elements: the pinion-gear pair, the load machine, and the output shaft. Each of these is in torsion. Torsional stiffness accounts for the elasticity of the system. Spiral bevel gears are ideal for applications requiring tight backlash monitoring and high-speed operations. CZPT precision machining and adjustable locknuts reduce backlash and allow for precise adjustments. This reduces maintenance and maximizes drive lifespan.
Spiral bevel gears are useful for both high-speed and low-speed applications. High-speed applications require spiral bevel gears for maximum efficiency and speed. They are also ideal for high-speed and high torque, as they can reduce rpm without affecting the vehicle’s speed. They are also great for transferring power between two shafts. Spiral bevel gears are widely used in automotive gears, construction equipment, and a variety of industrial applications.

Hypoid bevel gear

The Hypoid bevel gear is similar to the spiral bevel gear but differs in the shape of the teeth and pinion. The smallest ratio would result in the lowest gear reduction. A Hypoid bevel gear is very durable and efficient. It can be used in confined spaces and weighs less than an equivalent cylindrical gear. It is also a popular choice for high-torque applications. The Hypoid bevel gear is a good choice for applications requiring a high level of speed and torque.
The Hypoid bevel gear has multiple teeth that mesh with each other at the same time. Because of this, the gear transmits torque with very little noise. This allows it to transfer a higher torque with less noise. However, it must be noted that a Hypoid bevel gear is usually more expensive than a spiral bevel gear. The cost of a Hypoid bevel gear is higher, but its benefits make it a popular choice for some applications.
A Hypoid bevel gear can be made of several types. They may differ in the number of teeth and their spiral angles. In general, the smaller hypoid gear has a larger pinion than its counterpart. This means that the hypoid gear is more efficient and stronger than its bevel cousin. It can even be nearly silent if it is well lubricated. Once you’ve made the decision to get a Hypoid bevel gear, be sure to read up on its benefits.
Another common application for a Hypoid bevel gear is in automobiles. These gears are commonly used in the differential in automobiles and trucks. The torque transfer characteristics of the Hypoid gear system make it an excellent choice for many applications. In addition to maximizing efficiency, Hypoid gears also provide smoothness and efficiency. While some people may argue that a spiral bevel gear set is better, this is not an ideal solution for most automobile assemblies.
gear

Helical bevel gear

Compared to helical worm gears, helical bevel gears have a small, compact housing and are structurally optimized. They can be mounted in various ways and feature double chamber shaft seals. In addition, the diameter of the shaft and flange of a helical bevel gear is comparable to that of a worm gear. The gear box of a helical bevel gear unit can be as small as 1.6 inches, or as large as eight cubic feet.
The main characteristic of helical bevel gears is that the teeth on the driver gear are twisted to the left and the helical arc gears have a similar design. In addition to the backlash, the teeth of bevel gears are twisted in a clockwise and counterclockwise direction, depending on the number of helical bevels in the bevel. It is important to note that the tooth contact of a helical bevel gear will be reduced by about ten to twenty percent if there is no offset between the two gears.
In order to create a helical bevel gear, you need to first define the gear and shaft geometry. Once the geometry has been defined, you can proceed to add bosses and perforations. Then, specify the X-Y plane for both the gear and the shaft. Then, the cross section of the gear will be the basis for the solid created after revolution around the X-axis. This way, you can make sure that your gear will be compatible with the pinion.
The development of CNC machines and additive manufacturing processes has greatly simplified the manufacturing process for helical bevel gears. Today, it is possible to design an unlimited number of bevel gear geometry using high-tech machinery. By utilizing the kinematics of a CNC machine center, you can create an unlimited number of gears with the perfect geometry. In the process, you can make both helical bevel gears and spiral bevel gears.

Straight-cut bevel gear

A straight-cut bevel gear is the easiest to manufacture. The first method of manufacturing a straight bevel gear was to use a planer with an indexing head. Later, more efficient methods of manufacturing straight bevel gears were introduced, such as the Revacycle system and the Coniflex system. The latter method is used by CZPT. Here are some of the main benefits of using a straight-cut bevel gear.
A straight-cut bevel gear is defined by its teeth that intersect at the axis of the gear when extended. Straight-cut bevel gears are usually tapered in thickness, with the outer part being larger than the inner portion. Straight-cut bevel gears exhibit instantaneous lines of contact, and are best suited for low-speed, static-load applications. A common application for straight-cut bevel gears is in the differential systems of automobiles.
After being machined, straight-cut bevel gears undergo heat treatment. Case carburizing produces gears with surfaces of 60-63 Rc. Using this method, the pinion is 3 Rc harder than the gear to equalize wear. Flare hardening, flame hardening, and induction hardening methods are rarely used. Finish machining includes turning the outer and inner diameters and special machining processes.
The teeth of a straight-cut bevel gear experience impact and shock loading. Because the teeth of both gears come into contact abruptly, this leads to excessive noise and vibration. The latter limits the speed and power transmission capacity of the gear. On the other hand, a spiral-cut bevel gear experiences gradual but less-destructive loading. It can be used for high-speed applications, but it should be noted that a spiral-cut bevel gear is more complicated to manufacture.
gear

Spur-cut bevel gear

CZPT stocks bevel gears in spiral and straight tooth configurations, in a range of ratios from 1.5 to five. They are also highly remachinable except for the teeth. Spiral bevel gears have a low helix angle and excellent precision properties. CZPT stock bevel gears are manufactured using state-of-the-art technologies and know-how. Compared with spur-cut gears, these have a longer life span.
To determine the strength and durability of a spur-cut bevel gear, you can calculate its MA (mechanical advantage), surface durability (SD), and tooth number (Nb). These values will vary depending on the design and application environment. You can consult the corresponding guides, white papers, and technical specifications to find the best gear for your needs. In addition, CZPT offers a Supplier Discovery Platform that allows you to discover more than 500,000 suppliers.
Another type of spur gear is the double helical gear. It has both left-hand and right-hand helical teeth. This design balances thrust forces and provides extra gear shear area. Helical gears, on the other hand, feature spiral-cut teeth. While both types of gears may generate significant noise and vibration, helical gears are more efficient for high-speed applications. Spur-cut bevel gears may also cause similar effects.
In addition to diametral pitch, the addendum and dedendum have other important properties. The dedendum is the depth of the teeth below the pitch circle. This diameter is the key to determining the center distance between two spur gears. The radius of each pitch circle is equal to the entire depth of the spur gear. Spur gears often use the addendum and dedendum angles to describe the teeth.

China Precise Planetary Gear Reducer with 400W Servo Motor and 60 Steering Wheel Output Reducer     gear cycleChina Precise Planetary Gear Reducer with 400W Servo Motor and 60 Steering Wheel Output Reducer     gear cycle
editor by CX 2023-04-07